55 chev napco converted truck

skinanbones

I drank the MEK
A shot with the all the cages in the final spot, nice to see it all match up.
JQizANbh.jpg


The final colours on the engine and starting to detail it up
H2Ctw1Eh.jpg


not the greatest shot, but a test fit with the final colour on the body and hopefully one of the last times it goes together
Txb2NWth.jpg
 

skinanbones

I drank the MEK
I made a few changes to the door cards and changed the colours slightly.
TVNTiI2h.jpg


Also added a few more details to the motor and attached everything together
JhPOwrJh.jpg
 

skinanbones

I drank the MEK
Lots of work done the last week or so. Windows are in the truck now.
lQgouLGh.jpg


The dash and the door cards are also installed
85Bo1dRh.jpg

There is a smoked clear lens in the dash for the gauges and i put a blue led behind it for the racepack look.
ImcLl0Kh.jpg


I build the exhaust from stainless straws, i put threaded rod down the inside and then bent it as needed
WQsTAGwh.jpg

2XKGtQyh.jpg


All the little details are on the motor now.
5WTUCSmh.jpg
 

skinanbones

I drank the MEK
At this point the truck is done for the most part from what i am going to do with it. Another builder will get it for some minor detail like badging and decals.
BjTH3tTh.jpg

Nb0q1Z6h.jpg

AuL6j48h.jpg

s1CTryoh.jpg
 
  • Like
Reactions: TLC

TLC

Scaled, but not fishy.
This build really turned out beautiful mate, you should be proud! :cool2: :biggthumpup:
Huge respect for these 3D printed/styrene scratch builds, so much work goes into them. I hope the final owner appreciates your efforts. ::2thumbs
 
Top