Axial Vanguard Esc

raptorguy

New member
Hey everyone. Just bought myself a used 1 10 scale axial yeti with the 3150kv motor and vanguard esc in it.
Since it didn't come with a remote or receiver I went ahead and threw my FlySky GT3B in it. I used a 4200mah 8.4v nimh battery.
Problem: I have steering and the 2 speed servo works. Once I go to give it full throttle it slows down. Eventually stops. Also the green and yellow leds start blinking. Thanks in advance.
 

imthatguy

Putting it in "H"
Vanguard is probably in Lipo mode and doesn't like your Nimh battery. I suggest finding the ESC instructions or manual on Axial's page.
 
Top