Ballistic17's Chevy Pre-runner

Ballistic17

Supporting Member
Well I had to jump on the Pro-Line twin I beam kit. After Pre-ordering the kit I ordered a 10.2 Deadbolt to use as a starting point. Than order a VP Currie F9 axle to start on things. Also ordered a bunch more stuff so stay tune.

af0c02495f160ab06152757b339ab58e.jpg
76d88db8311a9c193f3968fe594e3437.jpg
 

Ballistic17

Supporting Member
Some more goodies showed up today and some more progress happened. Got the Pro-Line big bore shocks, VP swaybar and Ssd-rc rear shock hoops. Power will come from a copperhead and a 4600kv motor. Used a Spare-Time Hobbies rear sway bar mount to mount the swaybar. Had to put the mount on top instead of the bottom to get it to work. But so far so good.

2f05cdf7f035306550fb7e7d664ab380.jpg
ce82d11dfd462e408ee7a29099050822.jpg
f1d2ecee5d4e7b9433518229e06ac44d.jpg
10faf45073401fe6574a66b93b24087f.jpg
48b1cbb183a7357f0a6bde91a3f367bd.jpg
d10c82cf6329f1468c16ee44322b8ae6.jpg
1f7a3f8691e2c1119fe19d144ffc0216.jpg
 
Last edited:

Ballistic17

Supporting Member
Got a set of Ssd-rc Champion beadlocks and Pro-Line Racing Toyo Open County R/T trails. Also got the body cut out.

270c9aa56aa098c937953ae352a358fc.jpg
41dc71788a39d7c76542b2749205f91c.jpg
d5c1610d4f6286828ddd2a9d4fc630d7.jpg
 

Ballistic17

Supporting Member
Got my body painted. Went with Spaz Stix candy apple red backed with silver metallic hard anodized. Turned out pretty good.

3e9caa3fceb779dadd5dfad197c4cab6.jpg
df66d925d36d25a3df624207bc62ca6f.jpg
42c6363afaf42cb53e7836df6f9533b4.jpg
b27b60385bc0a984d0aaacb338a32645.jpg
1f5af0473dd3655fa08564057c5e61d0.jpg
662c98b1514c26d1b25b6ada49d760c5.jpg
 

Kear

Bleb
Man, that body looks good in just about any color. I've got one on a monster truck in blue and I'm super happy with it, should've gone for sparkle though!

Also needs some mirrors too, the fenders would even keep em protected!
 
Top