Trf 2 quarter elliptical rear suspension

So springs are cut forward of front axle and aft of rear axle i removed the wedge from spring hanger as it was useless the leaf pack leafs go as follows to stop spring wrap. Small on bottom main in middle middle on top. Chino the leaf eyes. Replace. Hanger thru bolt with 3mm screw. And you have a front quarter elliptic suspension and also a rear quarter elliptic suspension the spring loaded shocks provide the lift and a lot of it over stock. The articulation is increased dramatically. Over stock. Using this in the front make it a bit wonky and i only recommend for the rear. But over all increased capabilities by 100% feel free to message me for more info
08a223f915d63d4b880ddd1d2e2182dd.jpg
30185636d9a4c06c371d0d033b04573b.jpg
d0b583fdd984a21f08a3e6d6765c3494.jpg
989f2e613f331d0521cb54db73344a35.jpg
5aa89169818b850a531008f3868e24d3.jpg
39093d1c72b3d63aff54bc73e842c7d8.jpg
675f294586a58d805166b868be3b4dcb.jpg


Sent from my LGLS991 using Tapatalk
 
Top